Minimum Information Required for Technical Assistance ..........16 Return Merchandise Authorization - RMA ..............16 Specifications ....................17 Product specifications ....................17 Connections ........................ 17 Temperature range ..................... 17 Mechanical specifications ................... 17 Approvals and certificates ................18 Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 2...
Page 3
All other trademarks are the property of their respective you leave. owners. Product installation disclaim: Depending on how your deadbolt is Release Notice installed, to unlock your Danalock you will turn it the opposite This document is release 2.3 of the V3-BTZBE, Technical direction that deadbolt turned.
Page 4
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS provide a separation distance of at least 20 cm from all persons. OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA OR ANY OTHER PECUNIARY LOSS), REGARDLESS OF WHETHER POLY- Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 4...
Page 5
Bluetooth and Zigbee in 2400-2483 MHz under radiocommunications (Low Interference Potential Devices) Class Licence 2015; Variation 2016 (No. 1) V3-BTZBE: FCC ID: 2ADSH-V3BTZBE 12588A-V3BTZBE EC Declaration of Conformity: MIC certification no.: [R] xxx-xxxxxx Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 5...
Avoid Body Contact with Device during Operation Do not operate the V3-BTZBE in direct contact with your body. Maintain at least 8 inches (20 cm) separation between the device and any parts of your body. Danalock V3-BTZBE, Technical Manual v.2.3, February 2019...
Category of use The V3-BTZBE can be used in areas with medium frequency of use by people with some incentive to exercise care but where there is some chance of misuse, e.g. internal office doors or internal residential doors.
The following precautions apply: The V3-BTZBE unit is not intended for handheld use or to be worn on the body. It is recommended that a minimum separation of eight 8” inches (20 cm) is to be maintained between the V3-BTZBE unit and any persons’...
Page 9
ARE NOT REQUIRED BY EITHER THE IEC 62311 FOR BLUETOOTH LE OR FCC/IEEE/ICNIRP REQUIREMENTS FOR BLUETOOTH LE. The V3-BTZBE unit is not intended for handheld use or to be worn on the body. A minimum separation of eight (8”) inches (20 cm) is to be maintained between the V3- BTZBE and any persons’...
This privacy policy governs your use of the software application ”danalock App” for mobile devices that is created by Poly-Control ApS. The Application controls the use of the electronic door locking device Danalock, and only works with iPhone 4s / Android 4,4 or newer smartphones with Bluetooth LE or Zigbee technology.
States. Contact us If you have any questions regarding privacy while using the Application, or have questions about our practices, please contact us via email at mail@danalock.com Delivered standard content The delivered standard package content includes the following items: Outside US 1 x Danalock (incl.
V3-BTZBEE Installing the unit Practical installation advice Please follow the installation guide carefully. It is available on the danalock site that is found at https://guide.danalock.com/: Be aware that multiple installation guides exist. The installation guides are targeted for the specific models.
Identification of the lock Constant white for 1 sec Critical battery level Red light flashes every 5 minute Troubleshooting Various error situations are listed below along with some possible solutions. Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 13...
Bluetooth devices. Electro mechanical lock classification The V3-BTZBE is categorized as an electro mechanical lock for operation on the inside of a door instead of a pure mechanical wring. The lock incorporates an electromechanically operated motor for opening and closing the door based on either a finger press (from the inside) or a secure locking/unlocking command transmitted over a radio communication interface.
The warranty does not cover misuse, wrong installation or damage due to a faulty installation or wrong maintenance. The invoice act as the proof of warranty, so please keep it as reference for any warranty complaints. Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 15...
Minimum Information Required for Technical Assistance If you or a user reports difficulty with a V3-BTZBE unit, it is helpful to retrieve directly from the unit all current configuration settings and the message log data etc., that is accessible by the technical support when they receive the following information about the unit.
V3-BTZBE Specifications Product specifications The V3-BTZBE unit is with integrated antennas and battery Connections Operational voltage (supply voltage): 4 x 3V DC (12V DC) Standby time on the battery 450 days for V3-BTZBE models Temperature range In active running mode -20ºC to +40ºC...
V3-BTZBE Approvals and certificates The V3-BTZBE product is certified according to the following radio recommendations (EU, US/Canada and Japan respectively): FCC ID: 2ADSH-V3BTZBE 12588A-V3BTZBE Battery: CR123A 3V xxx-xxxxxx 2.4 GHz, Pout < 20 mW The V3-BTZBE is certified for electromechanically operated locks and striking plate’s...
Page 19
(ROHS2). The device complies with the essential requirements of the EC 1907/2006 regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 19...
Page 20
(EN/IEC 60950-1 + A11, A1, AC, A12 and A2):2013 ITE Safety The V3-BTZBE product complies with the essential requirements of the RED Directive 2014/53/EU as stated by the EC Declaration of Conformity. Certificates and Declaration of conformity (DOC) statements can be downloaded from the danalock website: https://doc.danalock.com/...
Need help?
Do you have a question about the V3-BTZBE and is the answer not in the manual?
Questions and answers