App. When the App has been installed, create a user profile and sign in. You will use this profile each time you sign into the App. You can now add your Danalock to your key chain in the App. - 14 -...
Page 16
LED-Signals A LED light on the Danalock indicates the status of several operations with different colours: LED-Mode LED colour Status indication Constant red till light finishes Lock has successfully locked Constant green till light finishes Lock has successfully unlocked Constant white for 3 seconds Power on.
Page 17
Configuring the Danalock V3 with click-commands You can configure the Danalock via the button found in the small hole on the top of the lock. When you click through settings, the LED will change color according to the scheme on the next page.
Page 18
Inclusion mode Green This mode is used to in- or exclude your Danalock with a Z-Wave or Zigbee gateway. When the Danalock blinks green it is in ex/inclusion mode and you have 30 seconds to pair the Danalock with a gateway.