Dmx Operation; Dmx Addressing - ProLights TURTLE User Manual

3.8 DMX OPERATION

• Press the button MENU so many times until shows [2-CH] or [3-CH] and press the button ENTER to con-
firm.
• Press the button UP/DOWN to select the desired DMX address [d001 - d512]. Press and hold to scroll
quickly. Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
The tables on page 12 indicate the operating mode and DMX value. The TURTLE is equipped with 3-pole
XLR connections.

3.9 DMX ADDRESSING

To able to operate the TURTLE with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the TURTLE. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels
(example)
2 33
3 33
DMX Address: 33
DMX512 Controller
DMX Address
occupied address for unit No. 1
33-34
33-35
DMX Address: 36
Example 3 DMX channels configuration (3CH mode)
TURTLE
Next possible start
address for unit No. 2
35
36
DMX Address: 39
Next possible start Next possible start
address for unit No. 3
37
39
DMX Address: 42
Fig.5
9
39
42
. . . . . . . . . . . .