Dmx Operation; Dmx Addressing - ProLights LUMIPAR7QPRO User Manual

10

3.10 DMX OPERATION

• Press MENU button until the following appears on the display: [Channel]. Press ENTER button.
• Using UP/DOWN button, select the desired personality [4 CH], [6-CH] or [10-CH]. Press ENTER button.
• Press MENU button until [Address] appears on the display. Press ENTER button.
• Using UP/DOWN button, select the desired DMX starting address [001 - 512]. Press ENTER button.
The tables on page 12 indicate the operating mode and DMX value. The LUMIPAR7QPRO is equipped with
3-pole XLR connections.

3.11 DMX ADDRESSING

To able to operate the LUMIPAR7QPRO with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LUMIPAR7QPRO. The other functions of the light effect panel
are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels
(example)
4 33
6 33
10 33
DMX Address: 33
DMX512 Controller
LUMIPAR 7QPRO
DMX Address Next possible start
occupied address for unit No. 1
33-36
33-38
33-42
DMX Address: 43
Example 10 DMX channels configuration (10 Ch mode)
Next possible start
address for unit No. 2
37
39
43
DMX Address: 53
Next possible start
address for unit No. 3
41
45
53
DMX Address: 63
Fig.4
45
51
63
. . . . . . . . . . . .