Functions And Settings; Operation; Basic - ProLights TURTLE User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LED Display
(fig.4).
MODE
Used to scroll through the current
operating mode, as well as back
out of the current menu option
TURTLE
MODE UP
UP
Used to select an increasing
value
DOWN ENTER
DOWN
Used to select a decreasing
value
7
Fig.4
ENTER
Used to activate a selection
and store it to memory