Disassembly; Disposal; Returns; Information - Gemu 605 Installation, Operating And Maintenance Instruction

Diaphragm valve
Table of Contents

Advertisement

Available languages

Available languages

CAUTION
Servicing and maintenance work may
G
only be performed by trained personnel.
GEMÜ shall assume no liability
G
whatsoever for damages caused
by improper handling or third-party
actions.
In case of doubt, contact GEMÜ before
G
commissioning.
1. Use appropriate protective gear as specifi ed
in plant operator's guidelines.
2. Shut off plant or plant component.
3. Secure against recommissioning.
4. Depressurize the plant or plant component.
The operator must carry out regular visual
examination of the valves dependent on
the operating conditions and the potential
danger in order to prevent leakage
and damage. The valve also has to be
disassembled in the corresponding intervals
and checked for wear (see chapter 11
"Assembly / Disassembly of spare parts").
14

Disassembly

Disassembly is performed
observing the same precautionary
measures as for installation.
Disassemble the diaphragm valve
G
(see chapter 11.1 "Valve disassembly
(removing actuator from body)").
15

Disposal

All valve parts must be
G
disposed of according to
relevant local or national
disposal regulations /
environmental protection
laws.
Pay attention to adhered
G
residual material and gas
diff usion from penetrated
media.
605
16

Returns

Clean the diaphragm valve.
G
Request a goods return declaration form
G
from GEMÜ.
Returns must be made with a completed
G
declaration of return.
If not completed, GEMÜ cannot process
credits or

repair work

but will dispose of the goods at
the operator's expense.
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods
can be processed only when
this declaration is completed.
17

Information

Note on Directive 2014/34/EU
(ATEX Directive):
A supplement to Directive
2014/34/EU is included with
the product if it was ordered
according to ATEX.
Note on staff training:
Please contact us at the
address on the last page for
staff training information.
Should there be any doubts or
misunderstandings in the preceding text,
the German version of this document
is the authoritative document!
30 / 36

Advertisement

Chapters

Table of Contents
loading

Table of Contents