Abdg Uninstall / Install Seal Of The Rear Appliance Cover - Kärcher SGV 6/5 Service Manual

 Unscrew the screws.
 Remove the cover towards the back.
 Unplug the protective conductor cable.
 Lift the cover over the accessory support and remove it
from the appliance.
Installation information
Ensure the correct seating of the seal during installation.

ABDG Uninstall / install seal of the rear appliance cover

 ABGH Uninstall / install appliance cover in the back
For better visibility, the seal is shown in red.
 Pull the seal out of the groove.
22
English 5.906-590.0 Rev. 01 (05/17)