Advertisement
To avoid accidents due to electrical faults
we recommend the use of sockets with a
line-side current-limiting circuit breaker
(max. 30 mA nominal tripping current).
Danger
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust particles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause
the appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out
pages!
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Suction hose connection
To connect the suction hose during vac-
uuming.
(see description / illustration
Machine socket
Note: Observe the maximum connected
power (see Chapter "Specifications").
To connect an electric tool.
(see description / illustration
Blowing connection
Connect the suction hose to the blower
connection, this will activate the blower
function.
(see description / illustration
6
English
After unlocking it, grab the appliance
head by the handle recess and remove it.
The carrying handle is also used to lock
the appliance head and the container.
To unlock, push the bow all the way for-
ward until you clear the lock.
(see description / illustration
Grab the appliance head by the handle
recess and remove it.
In the carrying position, the bow is
pointing up, during work with the appli-
ance, swivel the bow toward the back
until the operating controls on the appli-
ance are accessible.
This accessory compartment allows the
storage of suction nozzles on the appli-
ance.
This accessory compartment allows the
storage of the suction hose, the mains
cable and the suction nozzles.
(see description / illustration
Position MAX: Suction or blowing.
Position
connected electric tool
Performance regulation: Reduce the suc-
)
tion if necessary during vacuuming, blow-
ing or when working with an electric tool.
Position 0: The appliance is switched
off. Electric tool is supplied with voltage.
(see description / illustration
)
To rest the floor nozzle during work in-
terruptions.
(see description / illustration
)
Recessed grip
Carry handle
Accessory compartment, appli-
ance head
Accessory compartment, hook
Rotary switch (ON/OFF)
(with built-in socket)
MAX: Vacuuming with
Parking position
)
)
)
)
Advertisement
