Description Of The Appliance En - Kärcher WD 7.2 Series Instructions Manual

Check the power cord with mains plug for
damage before every use. If the power cord
is damaged, please arrange immediately
for the exchange by an authorised custom-
er service or a skilled electrician.
To avoid accidents due to electrical faults
we recommend the use of sockets with a
line-side current-limiting circuit breaker
(max. 30 mA nominal tripping current).
Caution
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust parti-
cles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause
the appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out
pages!
 These operating instructions describe
the basic models of the Multi-Purpose
Vacs shown on the front cover.
 Depending on the model, there are dif-
ferences in the equipment and included
accessories.
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
included in the scope of delivery
possible accessories
14
1 Suction hose connection
To connect the suction hose during vacu-
uming.
Note: In order to disconnect it, push down
with your thumb and pull the suction hose
out.
2 Machine socket
To connect an electric tool.
Note: Observe the maximum connected
power (see Chapter "Specifications").
3 Blowing connection
Connect the suction hose to the blower
connection, this will activate the blower
function.
4 Carrying handle
To carry the appliance or to remove the ap-
pliance head after unlocking.
5 Filter flap release button
6 Push handle
7 ExPress filter cleaning button
8 Filter cleaning display
9 Accessory compartment, hook
This accessory compartment allows the
storage of the suction hose, suction noz-
zles and the mains cable.
10 Key for mains cable retraction
11 Rotary switch (ON/OFF)
12 Parking position
To rest the floor nozzle during work inter-
ruptions.
13 Accessory storage container
This accessory compartment allows the
storage of the suction pipes or other acces-
sories.
14 Container closure
Pull out to open, push in to lock.
15 Wheels
16 Swivel casters
EN
– 2