Adwp Uninstall / Install Water Pump - Kärcher SGV 6/5 Service Manual

ADWP Uninstall / install water pump

ADKP Uninstall / install boiler pump
ADMA Uninstall / install solenoid valve
1 Screws
2 Carrier
 Unscrew the screws.
 Unplug the protective conductor cable.
 Open the carrier.
 ABGL Uninstall / install appliance cover on the left side
 ADAT Open / close carrier
1 Hose water pump in the back
2 Rubber bearing
3 Hose water pump at the top
4 Nut
5 Hose
6 Water pump
7 Boiler pump
8 Electric connectors
 Separate the electric connectors.
 Remove the hose of the water pump in the back.
 Remove the water pump from the rubber bearing at the
back.
 Remove the hose of the water pump at the top.
 Loosen nut and pull off the hose.
 Remove the water pump from the rubber bearing at the
front.
 ABGL Uninstall / install appliance cover on the left side
 ADAT Open / close carrier
The procedure conforms to the task:
 ADWP Uninstall / install water pump
 ABGL Uninstall / install appliance cover on the left side
 ADAT Open / close carrier
1 Holder solenoid valves
2 Screws
3 Hose
4 Solenoid valve
 Unscrew the screws.
 Remove the holder for the solenoid valves.
 Disconnect the connectors.
 Pull the hose off at the front and back.
 Remove solenoid valves.
English 5.906-590.0 Rev. 01 (05/17)
39