Preparation For Sintering Sinter Metal - Dentsply Sirona inLab Profire Operating Instructions Manual

5 Operation

5.10 Preparation for sintering sinter metal

36
Preparation for sintering sinter metal
5.10
Filling the sintering tray
1. Fill the sinter metal tray with a whole bottle of sinter beads for sinter
metal (REF 6413640).
2. Place the parts to be sintered with the chewing surface facing
downward on the sinter beads. In doing so, ensure that the parts to
be sintered and the sintering tray do not come into contact with
each other.
We recommend bedding in the restorations approx. half way into
the sinter beads.
Positioning the sintering tray in the inLab Profire
● Position the base plate of the sinter metal tray on the door insulation.
Carefully place the sintering tray with the restorations and the cover
centrally on the base plate and the sintering bell over it. Also position
this in the middle so that the intermediate space between the
sintering bell and sintering tray maintains the same distance overall.
Dentsply Sirona
Operating Instructions inLab Profire
67 15 887 D3770
D3770.201.01.02.02 05.2019