Configuration; Installation Site - Dentsply Sirona inLab Profire Operating Instructions Manual

Dentsply Sirona
Operating Instructions inLab Profire
67 15 887 D3770
D3770.201.01.02.02 05.2019
4

Configuration

Installation site

4.1
The inLab Profire high-temperature furnace is designed as a tabletop
unit. For stability, a flat, horizontal, and fire-proof surface of at least
50 cm x 60 cm, which can support loads of up to 80 kg, is
recommended.
Always place the furnace in dry rooms that are as dust-free as possible
and remember that no liquids may get on the furnace.
No readily flammable or ignitable gases or liquids may be stored in the
setup locations. Do not place any flammable or ignitable objects in the
vicinity of the furnace.
Maintain a minimum distance of 100 mm on all sides of the furnace for
adequate cooling.
Never obstruct the ventilation slots!
≥ 100 mm
4.1 Installation site
≥ 100 mm
80
kg
≥ 100 mm
inLab Profire
4 Configuration
15