6.1.8. The coordinated connection of remote sources of current or voltage through a
long line with a wave impedance Zw
(If the signal source has an output impedance, unequal to Zw, then these cases correspond to one-way
matching of the long line on the side of the signal receiver)
6.1.8.1. Mode "with common ground"
X1 (X2-X16, Y1-Y16)
Zв
6.1.8.3. Differential connection of an isolated current source or voltage
Zв
E-502
R=Zв
GND32
AGND
X1 (X2 -X16)
R1
AGND
E-502
R2
Y1 (Y2 -Y16)
6.1.8.2. Differential mode
Zв
R1=R2
R1+R2 = Zw
The circuit is valid only for the following E-502
voltage sub-ranges:
±2 V, ±1 V, ±0.5 V, ±0.2 V
X1 (Y2 -Y16)
R=Zв
E-502
Y1 (Y2-Y16)
AGND