MC2 Audio Ti Series Operator's Manual page 22

of the main window, and either fully across this window, or bracketed by the
device view and/or properties window.
The device view and properties windows can be combined into a single tabbed
window by picking either up and dragging it directly onto the other window where
a new anchor will appear.
Drop on left or right of this anchor
to dock properties to the left or right
of the device window.
Drop on the centre of the anchor to
dock as a pair of tabbed panes.
To separate out the windows again, just click on the tab of the window and drag
and drop it as required to select a new position.
Click and drag the tab to
separate the properties out
from the device view again...
Windows can also be left floating by dragging them from their current positions
and just dropping them on the main background.
Page 22 Breakout Operator's Manual