Table of Contents
Advertisement
Installation
Electrical Considerations
The Breakout box has been manufactured to comply with your local power supply
requirements but, before connecting the unit to the supply, ensure that the
voltage (printed on the rear panel) is correct, and that a mains fuse of the correct
type and rating has been fitted.
Make sure power outlets conform to the power requirements listed on
the back of the unit. Damage caused by connecting to incorrect AC
voltage is not covered by the warranty.
Mechanical Considerations
To ensure that this equipment performs to specification, it should be mounted in
a suitable rack or enclosure.
When mounting the unit in a rack or enclosure, ensure that there is adequate
ventilation. The cooling fan sucks cool air in through the RHS and blows warm air
out of the LHS of the unit through the ventilating grills.
Take care when mounting other equipment in the same rack.
Please also refer to the maintenance section on page 37 of this manual.
Page 8
Breakout Operator's Manual
Advertisement
Table of Contents
