Table of Contents
Advertisement
Expand the window to fill your screen and then, from the menus, choose
Tools
Options, and select the Comms tab.
Make sure the COM port number selected from the drop down list matches the
one discovered earlier.
Having selected the COM port, this window may now be closed by clicking OK.
We can now scan for connected devices and build up a list of all units on the
network. Either select Tools
As each device has a unique serial number IC built in, there is no need to worry
about setting ID numbers. An intelligent algorithm is used in conjunction with all
devices, so we don't need to check each number individually. (There are over
200 million possible IDs!)
Page 18
Autoscan, or press the button on the toolbar.
The baud rate must
remain at 57600 to
ensure compatibility
with all connected
devices.
The safest method of
connection to avoid
accidentally changing
any device settings is to
select "Retrieve settings
from units" as this will
upload all device(s)
properties and
parameters to the
computer.
Breakout Operator's Manual
Advertisement
Table of Contents
