SMARTBOX
listens on the following layer 4 protocols:
HTTPS:
Server: hiawatha
Purpose: web application control
Port: TCP 443
SMARTBOX
listens on the following layer 2 protocols:
ARP:
Server: linux
Purpose: address resolution
EtherType: 0x0806
LLDP:
Server: lldpd
Purpose: local system discovery
EtherType: 0x88cc
Typical configuration:
SMARTBOX
is intended to be placed behind a firewall, and the device should be remotely accessed via VPN. This
prevents the possibility of brute force attacks, denial of service attacks, and other exploits that may end up leading
to service interruptions.
SMARTBOX
other traffic sent to the device are transmitted over an encrypted link.
Cellular Modem Antenna Interface
Number of Connectors
Connector
Impedance
Input Sensitivity
Transmit Power
Cellular Modem LED Indicator
Number of Indicators
Green
Amber
Red
Off
Earth Ground Connection
Number of Grounds
66
does use HTTPS as its primary configuration interface, so that passwords and
1, labeled Cellular Antenna
SMA, female
50 ohms
-105 dBm typical
+24.5 dBm typical
1, labeled Cellular Antenna
Signal power is detected on antenna
Low signal at antenna input
No signal detected
Not used
1, labeled with Ground Symbol
Need help?
Do you have a question about the Smartbox and is the answer not in the manual?