Chapter 17 Install On Customer Site - Dish Network Smartbox User Manual

CHAPTER 17 INSTALL ON CUSTOMER SITE

The following table includes a high-level "punch list" of tasks, actions, and references to assist you in setting up
SMARTBOX on a customer site. The instructions are very similar to an initial installation. The list assumes that
software was updated during testing on the integration site and is up to date. However, the software version
should be checked to ensure that it is the latest version.
TASK
Unpack and
reassemble SMARTBOX
and connections.
Establish connection.
Refresh satellite feeds.
Verify tuners lock.
Scan for spot beams
and satellite services.
Set up CAS Server
(if needed).
Scan for ATSC services
(if needed).
Configure or add new
services or channels.
58
ACTION
Follow guidelines for installation.
Set up TCP/IP connection and login.
Chassis tab Click Apply button under
L-Band Inputs.
Blades tab Verify tuners have locked
for each blade.
Chassis tab Start Spot Beam Scan,
then Scan for Satellite Services.
Admin tab CAS Server.
Services page Scan for
ATSC Services.
Services page – various options.
REFERENCE
CHAPTER 2 ASSEMBLE
CHASSIS, POWER SUPPLIES
AND POWER INSERTERS
CHAPTER 4 UPDATE
SOFTWARE:
ESTABLISH COMMUNICATION
CHAPTER 4 UPDATE
SOFTWARE:
ENABLE SATELLITE INPUTS
CHAPTER 4 UPDATE
SOFTWARE:
VERIFY TUNERS LOCK
CHAPTER 7 SCAN FOR SPOT
BEAMS AND SATELLITE
SERVICES
CHAPTER 10 SET UP CAS
SERVER
CHAPTER 11 MAP SERVICES
CHAPTER 11 MAP SERVICES