Safety; Introduction; Safety Instructions - MAHA TPS II Original Operating Instructions

1

Safety

1.1

Introduction

Please read the standard operating procedures and user's manual thoroughly and carefully
before commissioning the machinery and comply with the instructions. The operating manual
should always be conveniently stored to be readily available at all times.
This operating manual is an addition to the operating manual for the testing lane Eurosystem
TRUCK. All safety instructions provided in chapter 1 of these operating instructions must be
complied with.
Apart from the safety instructions mentioned above, no additional safety instructions apply for
the operation of the speedometer tester. The speedometer tester is not equipped with any
additional safety features.
1.2

Safety Instructions

Š
The speedometer tester may only be operated by trained, authorized personnel.
Š
The speedometer tester may only be used and operated for its intended purpose: Testing
the tachometer function up to 160 km/h up to 13 t axle load.
Š
Sudden or strong braking actions and jerky accelerations are forbidden.
Š
The vehicle must be secured with tightening belts onto the roller set.
Š
Always drive straight onto the test stand's rollers. Front-wheel drive vehicles must maintain a
straight driving direction.
Š
Running vehicle engines represent potential carbon monoxide poisoning. The
operator/owner is responsible for providing sufficient air ventilation.
Š
Due to the high noise level (>90 dB), appropriate ear protection should be worn.
No persons are allowed in the vicinity of the rollers while the test stand is in operation!
D1 1005BA1-GB01
TPS II Eurosystem TRUCK
1