Pch-Fw Configuration; Amt Configuration; Usb Configuration - Aaeon IMBM-Q87A Manual

Serial ATA Port 0, 1, 2, 3, 4, 5
Port 0~5 [Enabled]
These items become configurable when you set the SATA Mode Selection item to
[AHCI] and [RAID], and allow you to enable/disable the SATA port(s). Configuration
options: [Disabled] [Enabled]
Hot Plug [Disabled]
These items become configurable when you set the SATA Mode Selection item
to [AHCI] and [RAID], and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.3.7 PCH-FW Configuration
This screen displays ME Firmware Mode, Type, SKU and version.
3.3.8 AMT Configuration
The items in this menu allow you to change the Intel
Technology (AMT) feature.
Intel AMT [Enabled]
®
Allow you to enable or disable the Intel
the BIOS extension. Configuration options: [Enabled] [Disabled]
iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or
set it to [Enabled] to use a password. Configuration options: [Enabled] [Disabled]
3.3.9 USB Configuration
The items in this menu allow you to change USB settings.
The USB Devices lists detected USB devices. If no USB device is connected,
the item shows None.
3-6
Active Management
®
Active Management Technology (AMT) in
®
IMBM-Q87A