Table of Contents
Advertisement
3.
CPU and chassis fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN1~2)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
IMBM-Q87A Fan connectors
CAUTION: Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
NOTE: The CPU_FAN connector supports a CPU fan of maximum 12V/2A fan
rating.
4.
Minicard connector
Use this connector to connect a Minicard reader.
IMBM-Q87A MINICARD connector
The Mini card module is purchased separately.
Chapter 2: Motherboard information
CHA_FAN1
CPU_FAN1
CHA_FAN2
MINI_CARD
2-19
Advertisement
Table of Contents
