Table of Contents
Advertisement
I C O N
K E Y
Valuable Info
Be Careful!
Installers Note
☺
User Note
SAT3 Feature
S A T
3
U S E R
/
I N S T A L L E R
SAT3 Programming Cont.
How To Program Pause Time Duration.
SAT3 can be set to pause from 1 to 9 seconds when the # key is pressed during
programming. This is useful for overseas exchanges that might require longer pauses.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 45 and a digit from 1 to 9 and
Example: To set the SAT3 Pause Time from the factory default of 2 seconds, to 4
seconds, key in 45 4
.
How To Change SAT3 Talk Time.
SAT3 can be set to stay active for conversation from 1 to 9 minutes, or 20 minutes.
The factory default talk time is 1 minute. It beeps 3 times, 10 seconds before
disconnecting.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 41 and a digit from 1 to 9 and
.
Example: To set the SAT3 Talk Time from the factory default of 1 minute, to 4
minutes, key in 41 04
.
How To set SAT3 4 – 8 digit Account number.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 51, the 4 - 8 digit Account number and
Example: To change the SAT3 Account number from the factory default of 0000 to
1950 key in 51 1950
.
If less than 4 digits are entered the Account number will not change.
How To set SAT3 4 digit Zone number.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 52, the 4 digit Zone number and
Example: To change the SAT3 Zone number from the factory default of 0000 to 2525
key in 52 2525
.
If less than 4 digits are entered the Zone number will not change.
How To set SAT3 Account Cycle Time.
When the SAT3 has called, it can automatically send it's 4 - 8 digit Account number in
increments of 10 seconds from 10 to 90 seconds. This is for security or monitoring
equipment, which know how to interpret the tones that SAT3 is sending.
G U I D E
.
. To set talk time to 20 minutes, key in 0 and
.
.
6
Advertisement
Table of Contents
