Table of Contents
Advertisement
I C O N
K E Y
Valuable Info
Be Careful!
Installers Note
☺
User Note
SAT3 Feature
S A T
3
U S E R
/
I N S T A L L E R
SAT3 Programming Cont.
How To Change SAT3 To Ring Down.
SAT3 can be set to function as a ring down type unit. The factory default is Ring
Down mode = OFF.
After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key in
43, and 1, and
.
Example: To set the SAT3 from a phone line unit to a Ring Down unit,
key in 43 1
.
To set the SAT3 back to a phone line unit, key in 43 0
0 = Normal dialing
1 = Ring down.
When set to ring down, SAT3 will NOT dial. There will be no dial tone.
SAT3 just goes off hook and remains off hook until time out. Pressing
force Account on command is operative, and Account cycle is operative.
How To Set SAT3 To Call a Central Station
SAT3 can be set to call a Central Station using the built-in 300/1200 Baud modem.
Place two pause signals ahead of the phone number and the SAT3 will call the number
and immediately start up the modem.
G U I D E
.
10
to
Advertisement
Table of Contents
