Table of Contents
Advertisement
I C O N
K E Y
Valuable Info
Be Careful!
Installers Note
☺
User Note
SAT3 Feature
S A T
3
U S E R
/
I N S T A L L E R
SAT3 Programming Cont.
How To Change SAT3 Password.
SAT3 password comes from the factory as 7777. This number can be any 4 digits.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 55, 4 digits from 0000 to 9999, and
Example: To set the SAT3 Password from the factory default of 7777 to 1234 (An
incredibly dumb choice), key in 55 1234
You must key in all 4 digits or your password will not change.
Make sure you keep your password recorded and stored safely. If you
forget the password, SAT3 may have to be returned to the factory to be
reset.
How To Change SAT3 Back To Original Factory
Settings.
SAT3 can be set back to original factory settings. This is useful if you think you may
have mis-keyed a function, or if you did not realize the consequences of some of your
choices.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 91 1, and
.
G U I D E
.
.
9
Advertisement
Table of Contents
