Table of Contents
Advertisement
I C O N
K E Y
Valuable Info
Be Careful!
Installers Note
☺
User Note
SAT3 Feature
S A T
3
U S E R
/
I N S T A L L E R
SAT3 Features, continued.
Stores up to 10 phone numbers up to 16 digits.
programming, SAT3 can dial 2 numbers alternating back and forth 5 times, or ten
different phone numbers one after the other. The combinations (up to 10) will
depend on the programming, and can be easily changed.
Touch-Tone™ Detect. The SAT3 has Touch-Tone detection for:
Remotely hanging up the SAT3.
Sending the 4-8 digit account number on command.
Remote Touch-Tone Programming.
Acknowledging Call. (Lights the flashing Talk LED).
Talk Time.
This is the time from 1 to 9 minutes, in 1-minute increments, or 20 minutes
(fixed), that a SAT3 remains connected for talking, before it times out and
hangs up.
Acknowledge Tone.
If programmed, will light up the flashing TALK light, after the SAT3 places a
call and the Acknowledge Tone has been received.
Password Control.
The SAT3 has a 4 digit-programming password.
programming from a Touch-Tone phone.
Account Cycle Time.
This is how the SAT3 can automatically send its 4 to 8-digit account number.
It does this in 10-second increments.
Account Confirm.
This function, (when programmed to do so), will automatically dial the next
number in it's memory, if the SAT3 does not send it's 4 to 8 digit account
number. SAT3 keeps doing this until it does send the account number, or
until it has dialed all the numbers (up to 10 total) programmed into it.
1200/300 Baud modem.
The SAT3 has a 1200/300 Baud modem for remote programming from a
computer, as opposed to a Touch-Tone phone
G U I D E
This is used for remote
2
Depending on the
Advertisement
Table of Contents
