Select Engineered Systems SAT3 User And Installer Manual page 6

I C O N K E Y
Valuable Info
Be Careful!
Installers Note
☺
User Note
SAT3 Feature
S A T 3 U S E R / I N S T A L L E R
SAT3 Features, continued.
Central Station signals.
This allows the SAT3 to automatically call a central station using the SIA "fast"
format (300 Baud) for off-site monitoring, using central station digital receivers
with two-way voice capability.
Account Number.
The SAT3 allows from a 4 to 8 digit account number, primarily for Central
Station alarm monitoring usage.
Zone Number.
Allows up to 1000 zones, when using a single account code.
would be, grouping several SAT3's on a site together, again for Central Station
alarm monitoring usage.
Second dial button. (SAT3/D only)
The SAT3/D has a second button, to dial a single 16-digit phone number,
such as for further information, or to a different location other than ones
programmed into the 10 pre-programmed locations. The second button when
pressed, will dial a single 16-digit phone number. This number may be used to
call a non-emergency number for instructions, etc. This number will be dialed
once and if not answered, or if the number is busy, the unit will hang up. The
user must press this button again, to try again.
G U I D E
3
An example