Put In A Single Phone Number; Number; Put In Second Button Phone Number; Call From A Pabx - Select Engineered Systems SAT3 User And Installer Manual

I C O N K E Y
Valuable Info
Be Careful!
Installers Note
☺
User Note
SAT3 Feature
S A T 3 U S E R / I N S T A L L E R
SAT3 Programming Cont.
How To Put in a Single Phone Number
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 10, followed by the phone number, and
Example: To make the SAT3 call 555 -1212, key in 10 5551212
You can key in up to 16 digits, for long distance or toll free numbers.
How To Take Out or Remove a Phone number.
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 10, followed by 0, and
Example: To make the SAT3 erase 555 -1212, key in 10 0
How To Put in Second Button Phone Number
(SAT3/D onl;y)
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 21, followed by the phone number, and
Example: To make the SAT3 call 555 –1212 when 2
5551212 . It will dial only the programmed phone number and has no central
station capability.
You can key in up to 16 digits, for long distance or toll free numbers.
How To Call from a PABX.
SAT3 can be used behind most Private Automatic Branch Exchange (PABX) systems.
The PABX must be able to send and receive Touch-Tones. Some systems need to dial
an 8 or a 9, and pause briefly before dialing the phone number. The # key on your
phone will add a pause of between 1 and 9 seconds. (Pause time is programmable.)
☺ After getting into program mode, (see Pg. 4) use your Touch-Tone™ phone to key
in 10, followed by 9 # the phone number, and
Example: To make the SAT3 dial 555 -1212, from behind a PABX that uses 9 to
get an outside line, and requires a pause, key in 10 9 # 555 1212
The 9 and the # both count as one digit each of the maximum allowable 16
digit phone number.
G U I D E
.
.
.
nd
.
5
.
button is pushed, key in 21
.