Manual Extension; Offloading - Loading; Offloading By Lifting - Haulotte COMPACT 8 Operating And Maintenance Instructions Manual

Photo 5
Photo 6
4.2 -

OFFLOADING - LOADING

Caution!
Carry out the offloading
operations on a stable,
sufficiently resistant, flat and
uncluttered surface.
32
Operating and maintenance instructions - COMPACT 8, 8W, 10N, 10, 12

4.1.2 - Manual extension

The platforms are equipped with a single manual extension with two possible
notches.
Conditions of use :
• Depress the pedal and push as far as the first or second notch according to
the desired extension (see Photo 5 and Photo 6).
• When transporting the lift on a trailer or vehicle, it is essential for the manual
extension to be locked and for the extension to be retracted (see Photo 7).
• It is recommended not to exceed the advocated load in order to make the
manual move of the extension easier.
IMPORTANT: Before any operation, check the condition of the machine, so as to
make sure that it has not been damaged during transport. Otherwise, make the
necessary reserves with the carrier in writing.
NOTE : An incorrect operation can cause the machine to fall and cause very
serious bodily injury and material damage.

4.2.1 - Offloading by lifting

Precautions : Make sure that:
• the machine is totally folded
• the lifting accessories are in good condition and have sufficient capacity.
• the personnel performing the operations is authorised to use lifting equip-
ment.
Offloading :
Offloading can be carried out using a fork-lift truck, or using straps placed in the
places provided for this purpose (see sketch below).
If there is a problem, it is recommended that you contact PINGUELY-
HAULOTTE's After-Sales Department.
Photo 7