Important: To The Operator; Control Switch; Dial Light; Indicator Light ("Mix Low") - Taylor 62 Operator's Manual

Section 5
To better communicate in the International arena, the
words on many of our operator switches and buttons
have symbols to indicate their functions. Your Taylor
equipment is designed with these International
symbols.
The following chart identifies the symbol definitions
used on the operator switches:
= The "ON/AUTO" button.
= The "OFF" button.
= The "MIX" button.
= The "WASH" button.
= The "MIX LOW" button.
= The "MIX OUT" button.
= The "FILL" button.
= The "RINSE" button.
Models 60 & 62

Important: To the Operator

Control Switch

The center position is "OFF". The left position is
"WASH", which activates the beater motor only. The
right position is "AUTO". It activates the beater motor
and the refrigeration system. To activate the
refrigeration system, raise the draw arm momentarily.

Dial Light

A red dial light is located on the right side of the control
switch. When the control switch is in the "AUTO"
position, this light will come on, indicating that the
refrigeration system is operable.

Indicator Light ("Mix Low")

The mix low indicator light is located on the front of the
machine directly above the flavor selector switch.
When the light flashes, it indicates that the mix hopper
has a low supply of mix and should be refilled as soon
as possible. If mix is not added, a starved freezing
cylinder will cause damage to the beater, blades, and
drive shaft.

Indicator Light ("Mix Out")

A mix out indicating light is located on the front of the
machine directly above the control switch. When the
light is on, the machine will shut down to prevent a
starved freezing cylinder.
11 Important: To the Operator