Configure the Appearance of the Channel Plot Window
Configure the appearance of the Channel Plot window as follows:
1. In the Plot and Data Config window, set up the following parameters:
a. Ensure that the Visible Plot column is checked for all three enabled channels.
b. Leave the Show Cursor column unchecked for all three enabled channels.
c. Under Plot Column, use the default plot column setting of 1 for all three enabled
channels.
d. Under the Signal Group column, select A for the thermocouple and RTD channels,
and select B for the voltage input channel.
e. Under the Color column, assign a unique color to each trace.
2. Click the Channel Plot - Control tab, and slide the Plot height bar to the left until you can
see both plots on the screen at once.
Verifying the Operation of Your Instrument
73