Chapter 5
Select the Instrument
To get started with QuickDAQ, follow these steps:
1. Connect your instrument to the USB port of your computer, and connect your sensors to
2. Start QuickDAQ.
3. Select MEASURpoint_USB for the Device Family name.
4. By default, the application "discovers" all devices that are available for the specified
5. Select the module name that corresponds to your instrument, and click Add.
66
the instrument.
The Device Selection window appears.
device family and displays the module name of the USB devices in the drop-down list. If
you want to refresh this list to determine if other devices are available, click Refresh.
Information about the device, including the model number, serial number, firmware version, driver
version, and scanning status is displayed.