Unpacking
Open the shipping box and verify that the following items are present:
• TEMPpoint, VOLTpoint, or MEASURpoint instrument
• USB cable
• EP361 +5V power supply and cable
• For DT9872, DT9874, and DT9874 instruments, a bag of pluggable screw terminable
blocks
If an item is missing or damaged, contact Data Translation. If you are in the United States, call
the Customer Service Department at (508) 946-5100. An application engineer will guide you
through the appropriate steps for replacing missing or damaged items. If you are located
outside the United States, call your local distributor, listed on Data Translation's web site
(www.mccdaq.com).
Once you have unpacked your instrument, check the system requirements, as described in the
next section.
Preparing to Use the Instrument
27