Table of Contents
Advertisement
Related Information
Refer to the following documents for more information on using a TEMPpoint, VOLTpoint, or
MEASURpoint USB instrument:
• DtxMeasurement IVI-COM Driver online help. This document describes how to use the
IVI-COM driver to access the capabilities of a TEMPpoint, VOLTpoint, or MEASURpoint
instrument.
The IVI-COM driver works with any development environment that supports COM
programming, including MATLAB® from The MathWorks
or Visual Basic®.NET, Agilent® VEE Pro, National Instruments™ LabVIEW™ or
LabWindows™, and so on.
• QuickDAQ User's Manual (UM-25242). This manual describes how to create a QuickDAQ
application to acquire and analyze data from a TEMPpoint, VOLTpoint, or MEASURpoint
instrument.
• IVI foundation (www.ivifoundation.org)
• Omega Complete Temperature Measurement Handbook and Encyclopedia® or the Omega
Engineering web site: http://www.omega.com. Both resources provide valuable
information on thermocouple types, RTD types, standards, and linearization.
Where To Get Help
Should you run into problems installing or using a TEMPpoint, VOLTpoint, or MEASURpoint
instrument, the Data Translation Technical Support Department is available to provide
technical assistance. Refer to
States or Canada, call your local distributor, whose number is listed on our web site
(www.mccdaq.com).
Chapter 7
for more information. If you are outside the United
About this Manual
TM
, Microsoft® Visual C#®.NET
11
Advertisement
Table of Contents
