Configure The Appearance Of The Channel Plot Window - Data Translation DT9828 User Manual

Chapter 4

Configure the Appearance of the Channel Plot Window

Configure the appearance of the Channel Plot window as follows:
1. In the Plot and Data Config window, set up the following parameters:
2. In the display area, click the tab for the Channel Plot window.
3. Click the Show Legend control (
4. Change the text for the label on the x-axis, by doing the following:
48
a. Ensure that the Visible Plot column is checked for both enabled channels.
b. Leave the Show Cursor column unchecked for all three enabled channels.
c. Under Plot Column, use the default plot column setting of 1 for both enabled
channels.
d. Under the Signal Group column, select A for both thermocouple channels.
e. Under the Color column, assign a unique color to each trace.
a. Right-click on the label.
b. Select Edit Label.
c. Enter the following text: Thermocouple Channels.
The Channel Plot window should appear as follows:
) on the toolbar.