Select the Device
To get started with your DT9837 Series module and the QuickDAQ application, follow these
steps:
1. Connect the DT9837 Series module to the USB port of your computer, and connect your
sensors to the module.
2. Start the QuickDAQ application.
The Device Selection window appears.
3. For the Device Family selection, select OpenLayersDevices.
By default, the application "discovers" all devices that are available for the specified
device family and displays the module name for the USB devices in the drop-down list. If
you want to refresh this list to determine if other devices are available, click Refresh.
4. Select the module name for the DT9837 Series module that you want to use from the list of
Available Devices, and click Add.
Information about the device, including the model number, serial number, firmware version, driver
version, and scanning status is displayed.
Verifying the Operation of a Module
51