Table of Contents
Advertisement
Unpacking
Open the shipping box and verify that the following items are present:
• DT9837, DT9837A, or DT9837B module
• EP365 USB cable
• Data Acquisition OMNI CD-ROM
If an item is missing or damaged, contact Data Translation. If you are in the United States, call
the Customer Service Department at (508) 481-3700, ext. 1323. An application engineer will
guide you through the appropriate steps for replacing missing or damaged items. If you are
located outside the United States, call your local distributor, listed on Data Translation's web
site (www.datatranslation.com).
Note: The DT9837 Series modules are factory-calibrated. If you decide that you want to
recalibrate the analog input or analog output circuitry, refer to the instructions in
Setting Up and Installing the Module
Chapter
8.
31
Advertisement
Table of Contents
