Huawei RP Series Install Manual page 29

HUAWEI RP Series Telepresence Systems
V100R001C04 Commissioning Guide
Before adjusting the camera mounting bracket, ensure that the wheel locks are toggled down
if a wheel rack is used.
Step 1 Align the silkscreen holes corresponding to the HD display size with the rack fixing holes.
l
l
Figure 3-10 Adjusting the rack
Step 2 Tighten the screws using a Phillips screwdriver to secure the camera mounting bracket.
----End
Issue 01
CAUTION
If you are using a 46-inch HD display, align the holes silk-screened with 1 and 1/2/T
with the rack fixing holes, as shown in Figure 3-10.
If you are using a 55-inch HD display, align the holes silk-screened with 1/2/T and 2/T
with the rack fixing holes.
Huawei Confidential
3 Installation
28