Huawei RP Series Install Manual page 35

HUAWEI RP Series Telepresence Systems
V100R001C04 Commissioning Guide
Step 6 Fasten the four M6 x 20 socket-head cap screws using an H5 Allen wrench to securely attach
the support to the rear of the HD display, as shown in Figure 3-15.
Figure 3-15 Installing the support
Before you move and lift an HD display, ensure that all the screws on its support are securely
fastened.
Step 7 Attach the HD display to the rack by fastening the screws on the rear of the HD display into
the corresponding holes on the rack, as shown in Figure 3-16.
Issue 01
NOTE
If you are using a 46-inch HD display, align the HD display holes with the holes silk-screened with
l
1 on the L and R bars.
If you are using a 55-inch HD display, align the HD display holes with the holes silk-screened with
l
2 on the L and R bars.
CAUTION
Huawei Confidential
3 Installation
34