Huawei RP Series Install Manual page 26

HUAWEI RP Series Telepresence Systems
V100R001C04 Commissioning Guide
Figure 3-6 Removing fasteners from the packing case
Step 5 Take out the rack and place it in an appropriate position in the conference room.
For details about where you can place the rack, see the Standard Document to the Decoration
of Huawei RP Series Telepresence Conference Room.
The rack is heavy. At least two persons are required to hold and move it. When lifting or
moving the rack, pay special attention to your safety. Use one hand to hold the rack base and
the other hand to hold one side of the rack, as shown in Figure 3-7. Ask your partner to hold
the rack in the same way on the other side. Lift the rack and move it to the left or right to
prevent it from being blocked by the fasteners.
Issue 01 Huawei Confidential
3 Installation
25