Huawei RP Series Install Manual page 40

HUAWEI RP Series Telepresence Systems
V100R001C04 Commissioning Guide
Step 6 Keep the arrows on the horizontal bars facing inward and arrows on the L and R bars pointing
towards the top of the HD displays. Place the supports on the rear of the HD displays, as
shown in Figure 3-23.
Figure 3-23 Placing the supports on the rear of the HD displays
Step 7 Align the HD display holes with the holes silk-screened with the number that matches the HD
display model on the L and R bars, as shown in Figure 3-24.
Figure 3-24 Aligning supports
Step 8 Fasten the eight M6 x 20 hex socket screws using an H5 Allen wrench to securely attach the
supports to the rear of the HD displays.
Step 9 Install the mounting components on the connecting bars, as shown in Figure 3-25.
Issue 01
NOTE
If you are using 46-inch HD displays, align the HD display holes with the holes silk-screened with 1
l
on the L and R bars.
If you are using 55-inch HD displays, align the HD display holes with the holes silk-screened with 2
l
on the L and R bars.
Huawei Confidential
3 Installation
39