HUAWEI RP Series Telepresence Systems
V100R001C04 Commissioning Guide
3.5 Installing the HD Display
Before installing the HD display, ensure that it can be powered on and that the video source
can be switched without artifacts.
Pay attention to the following items when installing the HD display:
l
l
l
The HD display is too large for one person to lift. When lifting the HD display, ensure that
you are doing so safely and with a correct lifting technique.
3.5.1 Types of HD Display Supports
Table 3-3 lists two types of HD display supports, each supporting a specific HD display. The
correct support is delivered with your HD display.
Table 3-3 Types of HD display supports
Type
Single-screen HD display
support (for the RP100)
Dual-screen HD display
support (for the RP200)
Issue 01
The left and right sides of the HD display support are defined when you stand with your
back towards the HD display.
To prevent the screen from being scratched, clean up the installation site and ensure that
there are no obstacles or sharp items around the HD display.
Assemble the HD display support first. Then install the HD display on the support.
DANGER
Huawei Confidential
Components
Four frames, as shown in Figure 3-11.
Left and right HD display supports and bridging
pieces, as shown in Figure 3-12.
3 Installation
29