Huawei RP Series Install Manual page 68

HUAWEI RP100&RP200 V100R001C04B010
Upgrade Guide
Figure 5-5 Upgrading the TE30 on a Wi-Fi network
l
Step 2 Double-click UpgMaster.exe to start the upgrade tool.
Step 3 Enter the IP address of the TE30 to be upgraded, and click Upgrade, as shown in Figure 5-68.
Figure 5-6 Enter the IP address
Step 4 When prompted, enter the upgrade password.
----End
5.2.1.4
Upgrading the TE30 endpoints in batches
l
To upgrade the TE30 endpoints by manually entering their IP addresses:
Step 1 Click
Step 2 Enter the IP addresses of the TE30 endpoints to be upgraded.
Step 3 Select all the IP addresses.
Step 4 Click Upgrade.
Figure 1-9 shows the batch upgrade by manually entering the TE30 IP addresses.
Issue 01 (2013-06-18)
Figure 5-57 shows the Wi-Fi network where the TE30 to be upgraded is placed.
HD e ndpoint
Upgrading a single TE30 endpoint
Start the upgrade tool, and set the IP addresses of the TE30 endpoints to be upgraded.
and enter the number of the TE30 endpoints you want to upgrade.
Huawei Confidential.
Wi-­‐Fi
network
IP address of the endpoint to upgraded
5 Soft Upgrade
PC
Select the upgrade file
67