Huawei RP Series Install Manual page 38

HUAWEI RP Series Telepresence Systems
V100R001C04 Commissioning Guide
Step 3 Remove the eight screws on the back of both HD displays using a Phillips screwdriver.
Step 4 Push the two HD displays toward the center until they are tightly placed side by side and
horizontally aligned with each other.
Step 5 Attach connecting plates.
1.
2.
Figure 3-19 Installation positions of the connecting plates for 46-inch HD displays
Figure 3-20 Installation positions of the connecting plates for 55-inch HD displays
3.
Issue 01
Select connecting plates based on the HD display size.
Remove the screws at the joints of the HD displays based on the following:
If you are using 46-inch HD displays, remove the six screws at the top joints of the
−
HD displays, as shown in Figure 3-19.
If you are using 55-inch HD displays, remove the eight screws at the top joints of the
−
HD displays, as shown in Figure 3-20.
Fasten M3 x 12 recessed pan head screws in the holes where the screws were removed to
securely attach the connecting plates, as shown in Figure 3-21andFigure 3-22.
Huawei Confidential
3 Installation
37