Allen-Bradley 1779-KFMR User Manual page 118

Chapter 8
Unless otherwise stated, values shown are in hexadecimal, and each block
shown represents one byte.
Set ENQs
Use this command to set the maximum number of ENQuiries an interface
will send to a host if that host does not respond to a message from the
interface. You can send this command to 1779-KFL interfaces only.
Default is 3.
Command Format:
Success Reply Format:
Unless otherwise stated, values shown are in hexadecimal, and each block
shown represents one byte.
Set Variables
Use this command to set the response timeout, attempts, and ENQs all at
once. The DATA field is three bytes long. Specify the response timeout
in the first byte, the number of attempts in the second byte, and the
number of ENQs in the third byte. You can send this command to
1779-KFL interfaces only.
Command Format:
Success Reply Format: