Tinycontrol LAN Controller V2.0 Manual page 23

manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
Managing PWM by HTTP GET:
change frequency:
http://192.168.1.100/ind.cgi?pwmf=9777 – setup frequency to 9777
change duty:
http://192.168.1.100/ind.cgi?pwmd=855 – setup duty to 85,5%
http://192.168.1.100/ind.cgi?pwm=1 – activates pwm output
http://192.168.1.100/ind.cgi?pwm=0 – off pwm output
http://192.168.1.100/ind.cgi?pwmd=990 – setup duty cycle pwm to 99%
http://192.168.1.100/ind.cgi?pwmf=5000 – setup 5 kHz frequency has all pwm outputs,
that is, PWM, PWM1, PWM2, PWM3
http://192.168.1.100/ind.cgi?pwm1=1 – activates pwm1 output
http://192.168.1.100/ind.cgi?pwm1=0 – off pwm1 output
http://192.168.1.100/ind.cgi?pwm2=1 – activates pwm2 output
http://192.168.1.100/ind.cgi?pwm2=0 – off pwm2 output
http://192.168.1.100/ind.cgi?pwm3=1 – activates pwm3 output
http://192.168.1.100/ind.cgi?pwm3=0 – off pwm3 output
http://192.168.1.100/ind.cgi?pwmd1=500 – setup duty cycle pwm1 to 50%
http://192.168.1.100/ind.cgi?pwmd2=990 – setup duty cycle pwm2 to 99%
http://192.168.1.100/ind.cgi?pwmd3=100 – setup duty cycle pwm3 to 10%
An accurate description of all the settings by POST / GET
for Even Config and the Scheduler is in a separate file
„POST / GET data description"
(downloadable from www.tinycontrol.eu)
23
www.tinycontrol.eu