Vega VEGADIF 65 Operating Instructions Manual page 76

10 Supplement
Ʋ Single chamber housing
Spring-loaded terminals for wire cross-
section
Electromechanical data - version IP 66/IP 68 (1 bar)
Cable entry
Ʋ Single chamber housing
Connection cable
Ʋ Configuration
Ʋ Wire cross-section
Ʋ Wire resistance
Ʋ Tensile strength
Ʋ Standard length
Ʋ Max. length
Ʋ Min. bending radius at 25 °C/77 °F
Ʋ Diameter approx.
Ʋ Colour - Non-Ex version
Ʋ Colour - Ex-version
Electromechanical data - version IP 66/IP 68 with external electronics
Connection cable between IP 68 instrument and external housing:
Ʋ Configuration
Ʋ Wire cross-section
Ʋ Standard length
Ʋ Max. length
Ʋ Min. bending radius at 25 °C/77 °F
Ʋ Diameter approx.
Ʋ Colour
Cable entry/plug
22)
Depending on the version M12 x 1, according to ISO 4400, Harting, 7/8" FF.
22)
76
– 1 x cable gland M20 x 1.5 (cable: ø 5 ... 9 mm), 1 x
blind plug M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
– 1 x plug (depending on the version), 1 x blind stopper
M20 x 1.5
or:
– 2 x blind plug M20 x 1,5
< 2.5 mm² (AWG 14)
– 1 x IP 68 cable gland M20 x 1.5; 1 x blind plug
M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
four wires, one suspension wire, one breather capillary,
screen braiding, metal foil, mantle
0.5 mm² (AWG 20)
< 0.036 Ω/m (0.011 Ω/ft)
> 1200 N (270 pounds force)
5 m (16.4 ft)
1000 m (3281 ft)
25 mm (0.985 in)
8 mm (0.315 in)
Black
Blue
Four wires, screen braiding, inner cover, screen braiding,
outer cover
0.5 mm² (AWG 20)
5 m (16.40 ft)
25 m (82.02 ft)
25 mm (0.985 in)
8 mm (0.315 in)
Blue
VEGADIF 65 • 4 ... 20 mA