Table of Contents
Advertisement
Operating Instructions Dräger FG4200
12. Settings
The measuring device can be configured according to user's requirements.
The functions are switched on and off via the control panel or switched to the input.
Settings Page 1
Date and time:
Key beep:
MSI printer:
Display:
Show help:
Auto. dayl.-saving:
The arrow button >> allows you to switch to the second settings page.
Settings Page 2
Enter system data:
Draft measurem.:
Calorific value:
Extend fuel table:
Average meas.:
Pressing the arrow button >> again allows you to switch to entry of a
foot text for the IR printer and language configuration.
19
Date and time can be set.
The key beep can be switched on or off.
The MSI printer protocol can be switched
on or off.
The display lighting can be set.
Built-in help texts can be enabled or
disabled.
Automatic adjustment of daylight
saving time can be switched on or off.
Entering the combustion system data during
the flue gas measurement can be switched
on or off.
The draft measurement during the flue gas
measurement can be switched on or off .
Switch consideration of calorific value on
or off.
Display the extended fuels table.
Switch average measurement on or off.
5695049
Edition 04 – January 2019
en
Advertisement
Table of Contents
