Table of Contents
Advertisement
GB
Remove and empty
the drip tray.
XS3000
Press the back of the
cup stand to remove it
and insert a cleaning
pellet (Krups XS3000)
in the cleaning pipe.
Empty your waste
water container and
put it back under the
coffee outlets.
Empty your waste
water container and put
it back under the coffee
outlets.
Remove and empty
your waste water
container.
Remove, fill and re-fit
the water tank.
Press the 'Service'
button to start up
the cleaning pro-
gram.
Again press the 'Service'
button to start the first
rinsing cycle.
Again press the 'Service'
button to start the
second rinsing cycle.
Empty the drip tray
and fit it again.
Place a container with a
minimum capacity of 0.6 l
under the coffee outlets.
1 - Cleaning cycle
The 'clean' light becomes steady.
The cleaning cycle will be run automatically.
The pump sucks up water intermittently. This operation lasts
about 10 minutes and the 'clean' light will flash again.
2 - First rinsing
The 'clean' light will become steady again.
The program continues.
A first rinsing cycle will be run automatically. It allows the
appliance to be rinsed and remaining detergent to be eli-
minated. This first rinsing cycle lasts about 5 minutes
and once finished the 'clean' light will flash again.
3 - Second rinsing
The 'clean' light again becomes steady.
A second cleaning cycle will be run automatically.
This second rinsing cycle lasts about 5 minutes.
Once the second rinsing cycle has finished, the 'clean'
light will go off.
Fill your water tank.
11
± ± 1 1 0 0 m m n n
± ± 5 5 m m n n
± ± 5 5 m m n n
Your appliance will be
ready for use again.
Advertisement
Table of Contents
