ABB ACS880 Firmware Manual page 260

260 Fault tracing
Code Warning
(hex)
A880 Motor bearing warning
Programmable warnings:
33.14 On-time 1 warning
select
33.24 On-time 2 warning
select
33.55 Value counter 1
warning select
33.65 Value counter 2
warning selection
A881 Output relay warning
A882 Motor starts warning
A883 Power ups warning
A884 Main contactor
warning
A885 DC charge warning
A886 On-time 1 warning
Programmable warning:
33.14 On-time 1 warning
select
A887 On-time 2 warning
Programmable warning:
33.24 On-time 2 warning
select
A888 Edge counter 1
warning
Programmable warning:
33.35 Edge counter 1
warning selection
A889 Edge counter 2
warning
Programmable warning:
33.45 Edge counter 2
warning selection
A88A Value integrator 1
warning
Programmable warning:
33.55 Value counter 1
warning select
A88B Value integrator 2
warning
Programmable warning:
33.65 Value counter 2
warning selection
A88C Device clean warning
A88D DC capacitor warning
A88E Cabinet fan warning
A88F Cooling fan warning
A890 Additional cooling fan
warning
A8B0 Signal supervision
Programmable warning:
32.06 Superv1 action
32.16 Superv2 action
32.26 Superv3 action
Cause
Warning generated by an on-
time timer or a value counter.
Warning generated by an edge
counter.
Programmable warnings:
33.35 Edge counter 1 warning
selection
33.45 Edge counter 2 warning
selection
Warning generated by on-time
timer 1.
Warning generated by on-time
timer 2.
Warning generated by edge
counter 1.
Warning generated by edge
counter 2.
Warning generated by value
counter 1.
Warning generated by value
counter 2.
Warning generated by an on-
time timer.
Programmable warnings:
33.14 On-time 1 warning select
33.24 On-time 2 warning select
Warning generated by a signal
supervision function.
What to do
Check the event log for an auxiliary code.
Check the source of the warning
corresponding to the code:
0: 33.13 On-time 1 source
1: 33.23 On-time 2 source
4: 33.53 Value counter 1 source
5: 33.63 Value counter 2
Check the event log for an auxiliary code.
Check the source of the warning
corresponding to the code:
2: 33.33 Edge counter 1 source
3: 33.43 Edge counter 2
Check the source of the warning
(parameter 33.13 On-time 1
Check the source of the warning
(parameter 33.23 On-time 2
Check the source of the warning
(parameter 33.33 Edge counter 1
source).
Check the source of the warning
(parameter 33.43 Edge counter 2
source).
Check the source of the warning
(parameter 33.53 Value counter 1
source).
Check the source of the warning
(parameter 33.63 Value counter 2
source).
Check the event log for an auxiliary code.
Check the source of the warning
corresponding to the code:
0: 33.13 On-time 1 source
1: 33.23 On-time 2 source
10: 05.04 Fan on-time counter.
Check the source of the warning
(parameter 32.07, 32.17
source.
source.
source).
source).
or 32.28).