Inserting Steps - EuroLite DMX Move Control 512 PRO User Manual

Programming

8.4 Inserting Steps

It is possible to add additional steps to chases or insert steps at any position. If the SPEED LED lights, you can scroll
through the individual steps with the encoder wheels.
1
Activate the programming mode.
2
Press the CHASE button (button lights).
3 Select the chase to be extended with one of
the
number buttons at the lower right corner.
●
The LED of the number button lights and the
display indicates the number and steps of the
chase.
●
If necessary, use the PAGE button to switch
between the memory banks 1-15 (LED A lights)
and 16-30 (LED B lights).
4
You can now add an additional step to the chase.
Simply create a scene or call a scene previously
memorized. Shortly press the REC button to
memorize the revised chase.
●
To confirm the memory procedure, all LEDs of the
controller flash three times and the display
increases the number and steps by one step.
www.eurolite.de
5
5
5
To insert a step between two steps press the
MENU/ESC button (control LED lights). Then
select the step after which a new step is to be
inserted. Create the desired scene or call a scene
previously memorized and press the REC button to
memorize the revised chase.
6
Repeat the steps 4 or 5 to add or insert further
steps.
7
To delete a step select it with one of the encoder
wheels. Then press the DEL button.
●
To confirm the deleting procedure, all LEDs of the
controller flash three time.
54
2